SINO Syringe Mould

syringe mould

SINO Mould Co., Ltd. was established in 2000, specializing in the research and development of all kinds of plastic mould. Such as: home appliance mould, bucket mould, chair mould, stool mould, table mould, automobile mould, medical mould and other kinds of plastic mould and hot runner system. SINO has absorbed the domestic and foreign advanced mold structure and technology; Reasonable selection of mold materials. We have established long-term tracking service with the plastic product manufacturers we cooperate with, listen to their opinions and suggestions carefully, and constantly improve our mold structure and production process, so that we produce moulds with high efficiency and long life. Let's talk about syringe mould in detail:

SINO specializes in the production of all kinds of packaging mould, and we can also produce a variety of medical mould, especially PET test tube mold and syringe mould. Because of our perfect hot runner system for PET and PS injection molding, and our high precision processing equipment, process and management, we can successfully produce multi-cavity molds. Characteristics of syringe mould:

1. Nickel plating die frame, can reach a high medical standard.

2. Stavax S420 manufactured by Assab, Sweden, is used as the steel material for the cavity and core, which is stainless steel and tempered steel

3. Injection molding gate type using hot runner point gate, so that the mold can be fully automatic production without manual care.

4. Reasonable and ingenious water design, so that the product molding cycle is reduced to less than 12 seconds.

5. The core of the slider: ruhr interface slider system.

6. Syringe cavity core polishing: mirror polishing treatment.

7. Syringe mould structure: insert method is adopted to make it set on the mold frame, and the same parts in the mold are interchangeable.

8. Syringe mould life: at least 5 million mold.

SINO provides good quality syringe mould first, service first for the purpose, sincere service for the majority of customers.

评论

发表评论

此博客中的热门博文

SINO PET Preform Production Lines

图片
PET preform mould is a special mould in plastic moulds, there are many considerations in mould design, tooling, machine adjustment. SINO PET preform production lines with more than 20 years'experience, can provide a very good reference. 1. Dispose of PET plastic PET plastic material has hydrophilia, sensitive to water at high temperatures. When the moisture content exceeds the limit, PET preforms will be embrittled.  Therefore, PET plastic materials must be dried before production, the drying temperature is 150℃, time of drying should be over 4 hours. If drying temperature is 170℃, time of drying should be 3 to 4 hours.  2. Mould and sprue design PET preform mould usually use hot runner system. It will be better to have a thermal baffle between mould and injection molding machine, the thickness of thermal baffle should be around 12mm, can withstand high pressure. To avoid local overheating or fragmentation, exhaust must be adequate, but the depth of the exhaust port is genera...
阅读全文

DKM Injection Molding Machine Quality Control

图片
Quality control of all mechanical parts DKM QC team is responsible for quality control of machine base, frame and all machine parts. We use CAM to check whether the frame and other parts are deformed before assembly, and check whether the dimensions of all parts are within the tolerance range of 2D drawings. Quality control of injection molding machine assembly As we all know, precision parts need to be correctly assembled, otherwise, we will never be able to produce a high quality and precision injection molding machine. The assembly workshop of DKM has professional assembly experience and skills, and has its own standard - "DKM Assembly Standard", rigorous and skilled technology is a powerful guarantee for orderly assembly and accurate operation of the machine. Quality control of all purchased parts DKM is very careful in the selection of suppliers. 90% of hydraulic components and electrical components are purchased from world famous brands. At the same time, we...
阅读全文

Plastic Chair Mould

图片
SINO Mould has more than 20 years of mould making experience and about 400 employees. SINO are specialized in plastic chair mould making (including children's chair, office chair, beach chair and coffee chair) with and without arm chair mould. Our mould quotations are of high quality and reasonable. Now please allow me to introduce how to make chair molds: Firstly, we need to scan the original sample for measuring points; Secondly, 3D chair design is carried out by computer. Thirdly, after the 3D design is confirmed by the customer, SINO will start the actual design of the chair mold. The chair mold design will also be sent to the customer for confirmation before the mold is processed. At the same time, the SINO sales manager will provide weekly tooling progress reports so that customers are well aware of the tooling manufacturing status. Fourthly, when the mold is finished, there will be 3 mold tests. 1. T0 is used by SINO company to check the mold condition. If there...
阅读全文